Ethernet PLC Series highlights at a glance:
※Built-in Ethernet capability available .
※Optional metal mounting plate offers mounting to the rear of the control panel door.
※Modbus RTU/ASCII/TCP protocol supported.
※Unit Size allows for DIN-rail mounting together with commonly used breakers in building automation applications.
※Powerful communication capability(1 RS232 port, 1 RS485 port/Expansion port and 1 LAN port).
※It’s optional for xLogic to act as slave or master in certain Modbus communication network.
Benefit :
※The ideal solution for simple automation tasks.
※Minimizes costs - replaces many conventional switching control devices.
※Reduces time requirements – simplified wiring and panel layout.
※Saves much space in the switching cabinet - modules based on a 4 width industry standard dimension replace a wide
variety of relays, timer switches and contactor relays.
※Furnishes the widest range of capabilities and successful implementation of extensive applications with the option of
selecting from 70 integrated functions and linking up to 512 of them in the user program.
※Additional external text display extends the possibilities for operator control and monitoring.
※Password protection – Protects your engineering IP.
※70 integrated, pre-tested functions – No additional devices, such as elapsed time counter, are required.
※Linking of 512 functions is possible – Extensive applications can be implemented without restrictions.
※Display of message texts, action items and current values as well as direct modification of the values on the display .
※Retentive data memory – Protects current values against loss in the event of a power failure.
※Together with the xLogic software, configuring of the xLogic is simply intuitive: program generation, project
simulation and documentation are accomplished using drag and drop functionality, allowing maximum ease of
operation.
Notes:
1.Ethernet interface configuration software is “ DeviceManager for Ethernet CPU”.
Configurable ANDROID APP for Ethernet & Wi-fi plc:http://www.idea-teknik.com/en/hmi_droid_application_examples.html
Ethernet PLC Series highlights at a glance:
※Built-in Ethernet capability available .
※Optional metal mounting plate offers mounting to the rear of the control panel door.
※Modbus RTU/ASCII/TCP protocol supported.
※Unit Size allows for DIN-rail mounting together with commonly used breakers in building automation applications.
※Powerful communication capability(1 RS232 port, 1 RS485 port/Expansion port and 1 LAN port).
※It’s optional for xLogic to act as slave or master in certain Modbus communication network.
Benefit :
※The ideal solution for simple automation tasks.
※Minimizes costs - replaces many conventional switching control devices.
※Reduces time requirements – simplified wiring and panel layout.
※Saves much space in the switching cabinet - modules based on a 4 width industry standard dimension replace a wide
variety of relays, timer switches and contactor relays.
※Furnishes the widest range of capabilities and successful implementation of extensive applications with the option of
selecting from 70 integrated functions and linking up to 512 of them in the user program.
※Additional external text display extends the possibilities for operator control and monitoring.
※Password protection – Protects your engineering IP.
※70 integrated, pre-tested functions – No additional devices, such as elapsed time counter, are required.
※Linking of 512 functions is possible – Extensive applications can be implemented without restrictions.
※Display of message texts, action items and current values as well as direct modification of the values on the display .
※Retentive data memory – Protects current values against loss in the event of a power failure.
※Together with the xLogic software, configuring of the xLogic is simply intuitive: program generation, project
simulation and documentation are accomplished using drag and drop functionality, allowing maximum ease of
operation.
Notes:
1.Ethernet interface configuration software is “ DeviceManager for Ethernet CPU”.
Configurable ANDROID APP for Ethernet & Wi-fi plc:http://www.idea-teknik.com/en/hmi_droid_application_examples.html
Ethernet PLC Series CPU | |||||||||
Model | Expansion | Supply volt | Inputs | Outputs | High-speed count | PWM | HMI | RTC | G.W(g) |
ELC-12AC-R-N | YES | AC110~240V | 8 digital | 4 relays (10A) | None | NO | YES | YES | 500g |
ELC-12DC-DA-R-N | YES | DC12V-DC24V | 4 digital/analog(I1-I4) + 4 digital (I5-I8) | 4 relays (10A) | I7,I8( Max.60k Hz) | NO | YES | YES | 500g |
Ethernet PLC Series CPU | |||||||||
Model | Expansion | Supply volt | Inputs | Outputs | High-speed count | PWM | HMI | RTC | G.W(g) |
ELC-12AC-R-N | YES | AC110~240V | 8 digital | 4 relays (10A) | None | NO | YES | YES | 500g |
ELC-12DC-DA-R-N | YES | DC12V-DC24V | 4 digital/analog(I1-I4) + 4 digital (I5-I8) | 4 relays (10A) | I7,I8( Max.60k Hz) | NO | YES | YES | 500g |
Power supply: | |
Nominal voltage | DC 12-24V |
Operating limits | DC 10.8-28.8V |
Immunity from micro power cuts | Typ.5 ms |
Max. Startup current | Max. 0.25A |
Max. absorbed power | 3.5 W (10.8V dc) ; 4 W (28.8V dc) |
Protection against polarity inversions | Yes |
Input parameters: | |
Input No | 8 ( I1-I8 ) |
Digital input | 8 ( I1-I8 ) |
Analogue input | 4 ( I1-I4)(0..10V DC) |
Digital inputs( I5-I8 ) | |
Input voltage | DC0-28.8V |
Input signal0 | < 5V DC; <1mA |
Input signal1 | > 8 V DC;>1.7mA |
Input current | 2.3mA @ 10.8V dc 2.6mA @ 12.0 V dc 5.2 mA @ 24 V dc 6.3 mA @ 28.8 V dc |
Response time | 0 to 1 :<1 ms ;1 to 0 :<1 ms |
Maximum counting frequency | 60k Hz(I7--I8) |
Sensor type | Contact or 3-wire PNP |
Input type | Resistive |
Isolation between power supply and inputs | None |
Isolation between inputs | None |
Inputs used as digital inputs( I1-I4 ) | |
Input voltage | DC0-28.8V |
Input signal0 | < 5V DC;<0.1mA |
Input signal1 | > 8 V DC;>0.3mA |
Input current | 0.4mA @ 10.8V dc 0.5mA @ 12.0 V dc 1.2mA @ 24 V dc 1.5mA @ 28.8 V dc |
Response time | 0 to 1 :Typ. 1.5 ms ;1 to 0 :Typ. 1.5 ms |
Maximum counting frequency | Typ.:4 HZ |
Sensor type | Contact or 3-wire PNP |
Input type | Resistive |
Isolation between power supply and inputs | None |
Isolation between inputs | None |
Inputs used as analog inputs( I1-I4 ) | |
Measurement range | DC 0---10V |
Input impedance | Min, 24KΩ ; Max. 72KΩ |
Input voltage | 28.8 V DC max |
Resolution | 10bit ,0.01V |
Accuracy at 25 °C | ± (Max.0.02)V |
Accuracy at 55 °C | ± (Max.0.04)V |
Isolation between analog channel and power supply | None |
Cable length | 10 m max. shielded and twisted |
Output parameters: | |
Output No. | 4 (Q1-Q4) |
Output type | Relay output |
Max. Allowable Power Force(Resistive) | CE: 10A,250V AC/DC30V UL/CUL:10A,250V AC; 5A, DC28V |
Electrical durability Expectancy | 105 Operations at Rated Resistive Load |
Mechanical life | 107 Operations at No Load condition |
Response time | Operate Time : 15 mSec. Max. Release Time : 10 mSec. Max. |
Built-in protections | Against short-circuits: None Against overvoltages and overloads: None |
Switch frequency: | |
Mechanism | 10Hz |
Resistor/light load | 2Hz |
Sensitive load | 0.5Hz |
Other parameters: | |
Ethernet port: | Built-In(10M/100M) |
Xlogic<--->Xlogic(by Ethernet) | 1 xlogic works as server can connect 3 client xlogics. |
Xlogic<--->Etherne/Internet: | xlogic works as TCP server or TCP client |
Weight | Approx.300g |
Power supply: | |
Nominal voltage | DC 12-24V |
Operating limits | DC 10.8-28.8V |
Immunity from micro power cuts | Typ.5 ms |
Max. Startup current | Max. 0.25A |
Max. absorbed power | 3.5 W (10.8V dc) ; 4 W (28.8V dc) |
Protection against polarity inversions | Yes |
Input parameters: | |
Input No | 8 ( I1-I8 ) |
Digital input | 8 ( I1-I8 ) |
Analogue input | 4 ( I1-I4)(0..10V DC) |
Digital inputs( I5-I8 ) | |
Input voltage | DC0-28.8V |
Input signal0 | < 5V DC; <1mA |
Input signal1 | > 8 V DC;>1.7mA |
Input current | 2.3mA @ 10.8V dc 2.6mA @ 12.0 V dc 5.2 mA @ 24 V dc 6.3 mA @ 28.8 V dc |
Response time | 0 to 1 :<1 ms ;1 to 0 :<1 ms |
Maximum counting frequency | 60k Hz(I7--I8) |
Sensor type | Contact or 3-wire PNP |
Input type | Resistive |
Isolation between power supply and inputs | None |
Isolation between inputs | None |
Inputs used as digital inputs( I1-I4 ) | |
Input voltage | DC0-28.8V |
Input signal0 | < 5V DC;<0.1mA |
Input signal1 | > 8 V DC;>0.3mA |
Input current | 0.4mA @ 10.8V dc 0.5mA @ 12.0 V dc 1.2mA @ 24 V dc 1.5mA @ 28.8 V dc |
Response time | 0 to 1 :Typ. 1.5 ms ;1 to 0 :Typ. 1.5 ms |
Maximum counting frequency | Typ.:4 HZ |
Sensor type | Contact or 3-wire PNP |
Input type | Resistive |
Isolation between power supply and inputs | None |
Isolation between inputs | None |
Inputs used as analog inputs( I1-I4 ) | |
Measurement range | DC 0---10V |
Input impedance | Min, 24KΩ ; Max. 72KΩ |
Input voltage | 28.8 V DC max |
Resolution | 10bit ,0.01V |
Accuracy at 25 °C | ± (Max.0.02)V |
Accuracy at 55 °C | ± (Max.0.04)V |
Isolation between analog channel and power supply | None |
Cable length | 10 m max. shielded and twisted |
Output parameters: | |
Output No. | 4 (Q1-Q4) |
Output type | Relay output |
Max. Allowable Power Force(Resistive) | CE: 10A,250V AC/DC30V UL/CUL:10A,250V AC; 5A, DC28V |
Electrical durability Expectancy | 105 Operations at Rated Resistive Load |
Mechanical life | 107 Operations at No Load condition |
Response time | Operate Time : 15 mSec. Max. Release Time : 10 mSec. Max. |
Built-in protections | Against short-circuits: None Against overvoltages and overloads: None |
Switch frequency: | |
Mechanism | 10Hz |
Resistor/light load | 2Hz |
Sensitive load | 0.5Hz |
Other parameters: | |
Ethernet port: | Built-In(10M/100M) |
Xlogic<--->Xlogic(by Ethernet) | 1 xlogic works as server can connect 3 client xlogics. |
Xlogic<--->Etherne/Internet: | xlogic works as TCP server or TCP client |
Weight | Approx.300g |